Short answer: there is no single "right" switch. Reviewers at RTINGS and PC Gamer both tested Moonlanders with Cherry MX Brown. Because the board is hot-swappable, you can change any switch later without soldering.
Why the Moonlander makes switch choice easy
Most keyboards lock you into your first choice. The Moonlander does not. ZSA explains that its switches sit in sockets instead of being soldered.
ZSA released the Moonlander in 2020, according to PC Gamer's review. That review also notes you can replace every switch with Cherry MX or Kailh options.
So your first pick at checkout is a starting point, not a life sentence. ZSA even jokes about "switching your switches." We will not apologise for repeating the pun.
What this means for you
- You do not need a soldering iron.
- You can test a few switch types before you commit.
- You can mix switch types on one board.
- Old switches go back in a box for later.
Official switch options
The launch list had ten options, per TechPowerUp's launch coverage. The Deskthority wiki and RTINGS list the same families.
ZSA builds each board to order, so the checkout list can change. Check ZSA's configurator for what is available today.
| Maker | Switch | Source |
|---|---|---|
| Cherry | MX Blue, MX Brown | Deskthority |
| Kailh Speed | Gold, Silver, Bronze, Copper | Deskthority |
| Kailh Box | Black, Brown, Red, White | RTINGS |
RTINGS adds one compatibility detail. The Moonlander uses Cherry MX-style stems and a 5-pin Cherry socket, per its comparison page.
Linear, tactile or clicky?
Switch type decides how a key feels and sounds. Pick the type first, then the brand.
One long-term owner logged their experiments on a personal Moonlander page. These are that owner's labels, so treat them as one data point.
| Switch | Type (per owner's notes) |
|---|---|
| Cherry MX Brown | Tactile |
| Kailh Speed Silver | Linear |
| Kailh Box Red | Linear |
| Kailh Speed Gold | Clicky |
| Kailh Speed Bronze | Clicky |
| Kailh Box Jade | Clicky |
Quick plain-English guide
- Linear: smooth press, no bump.
- Tactile: a small bump tells you the key registered.
- Clicky: a bump plus an audible click.
How to pick your switch
Start with where you will use the board. A shared office and a private desk need different answers.
| Your situation | Where to start | Why |
|---|---|---|
| Shared office | Cherry MX Brown | PC Gamer calls it "pretty quiet (for mechanical keys)." |
| You want a click | A clicky type, such as Kailh Box Jade | Clicky types give audible feedback (owner's notes). |
| You like smooth presses | A linear type, such as Kailh Box Red | The owner preferred Box Red over standard Cherry MX Red. |
| You cannot decide | Cherry MX Brown, then experiment | Hot-swapping makes mistakes cheap. |
On that last point, the owner's notes mention that standard Cherry MX Reds felt wobblier than Box Reds. That is one person's feel, not a lab result. Your fingers get the final vote.
A simple testing plan
- Order your best-guess switch at checkout.
- Type on it for two full weeks.
- Note what annoys you: noise, bump or effort.
- Buy a small pack of a different type.
- Swap a few keys and compare.
How to swap switches safely
ZSA includes a double-sided key puller in the box. It removes both keycaps and switches, according to ZSA's guide.
ZSA also tells you to lay the board flat first. If you tent it, loosen the thumb cluster tenting screw and the leg.
Steps
- Lay the Moonlander flat and stable.
- Pull the keycap with the puller.
- Pull the switch straight up with the puller.
- Press the new switch straight down into the socket.
- Refit the keycap and test the key.
Rough handling can damage switches or the board, as this hot-swap guide from Fantech warns. Go slowly. Your keyboard is not a jar lid.
Common mistakes
- Buying the wrong stem type. The Moonlander uses Cherry MX-style stems (RTINGS). Low-profile switches will not fit.
- Ordering spares without counting. One owner lists 72 keys, eight on the thumb pads. Check ZSA's site before you buy.
- Expecting wireless. RTINGS and PC Gamer both describe the Moonlander as wired only.
- Ignoring software. PC Gamer found remapping easy in ZSA's Keymapp software. Switch feel is only half the customization story.
- Pulling at an angle. Pull straight up. Bent pins are a bad afternoon.
FAQ
Can you change switches on a Moonlander?
Yes. The board is hot-swappable, so no soldering is needed. ZSA supplies the key puller.
Which switch comes on the Moonlander?
You choose at checkout from Cherry MX and Kailh options. RTINGS and PC Gamer both reviewed units with Cherry MX Brown.
How many switches does a Moonlander have?
One owner's notes list 72 keys, eight on the thumb pads. Confirm on ZSA's product page before ordering spares.
Is the Moonlander good for gaming and office work?
RTINGS rates it excellent for gaming and fantastic for office use. PC Gamer says it handles gaming well, though ZSA made some unusual layout choices.
Does it work with Windows, macOS and Linux?
RTINGS lists it as fully compatible with all three.
More from the blog
Looking for more quick explainers? These guides come from our General Knowledge section:
- What Does HML Mean on Snapchat: A Complete Guide
- What Are Program Stars in MLB The Show 24?
- What is Passive RP in FiveM: A Detailed Exploration
The bottom line
Pick a sensible starting switch, such as Cherry MX Brown, and live with it for a while. If it annoys you, swap it. That freedom is the whole point of the Moonlander.
Sources
- RTINGS: ZSA Moonlander review
- RTINGS: Moonlander vs MoErgo Glove80 comparison
- PC Gamer: ZSA Moonlander review
- ZSA: Change your own keyswitches
- TechPowerUp: Moonlander Mark 1 announcement
- Deskthority wiki: Moonlander
- Owner's Moonlander notes (personal page, single-user experience)
- Fantech: How to replace switches on a hot-swappable keyboard
Short answer: there is no single "right" switch. Reviewers at RTINGS and PC Gamer both tested Moonlanders with Cherry MX Brown. Because the board is hot-swappable, you can change any switch later without soldering.
Why the Moonlander makes switch choice easy
Most keyboards lock you into your first choice. The Moonlander does not. ZSA explains that its switches sit in sockets instead of being soldered.
ZSA released the Moonlander in 2020, according to PC Gamer's review. That review also notes you can replace every switch with Cherry MX or Kailh options.
So your first pick at checkout is a starting point, not a life sentence. ZSA even jokes about "switching your switches." We will not apologise for repeating the pun.
What this means for you
- You do not need a soldering iron.
- You can test a few switch types before you commit.
- You can mix switch types on one board.
- Old switches go back in a box for later.
Official switch options
The launch list had ten options, per TechPowerUp's launch coverage. The Deskthority wiki and RTINGS list the same families.
ZSA builds each board to order, so the checkout list can change. Check ZSA's configurator for what is available today.
| Maker | Switch | Source |
|---|---|---|
| Cherry | MX Blue, MX Brown | Deskthority |
| Kailh Speed | Gold, Silver, Bronze, Copper | Deskthority |
| Kailh Box | Black, Brown, Red, White | RTINGS |
RTINGS adds one compatibility detail. The Moonlander uses Cherry MX-style stems and a 5-pin Cherry socket, per its comparison page.
Linear, tactile or clicky?
Switch type decides how a key feels and sounds. Pick the type first, then the brand.
One long-term owner logged their experiments on a personal Moonlander page. These are that owner's labels, so treat them as one data point.
| Switch | Type (per owner's notes) |
|---|---|
| Cherry MX Brown | Tactile |
| Kailh Speed Silver | Linear |
| Kailh Box Red | Linear |
| Kailh Speed Gold | Clicky |
| Kailh Speed Bronze | Clicky |
| Kailh Box Jade | Clicky |
Quick plain-English guide
- Linear: smooth press, no bump.
- Tactile: a small bump tells you the key registered.
- Clicky: a bump plus an audible click.
How to pick your switch
Start with where you will use the board. A shared office and a private desk need different answers.
| Your situation | Where to start | Why |
|---|---|---|
| Shared office | Cherry MX Brown | PC Gamer calls it "pretty quiet (for mechanical keys)." |
| You want a click | A clicky type, such as Kailh Box Jade | Clicky types give audible feedback (owner's notes). |
| You like smooth presses | A linear type, such as Kailh Box Red | The owner preferred Box Red over standard Cherry MX Red. |
| You cannot decide | Cherry MX Brown, then experiment | Hot-swapping makes mistakes cheap. |
On that last point, the owner's notes mention that standard Cherry MX Reds felt wobblier than Box Reds. That is one person's feel, not a lab result. Your fingers get the final vote.
A simple testing plan
- Order your best-guess switch at checkout.
- Type on it for two full weeks.
- Note what annoys you: noise, bump or effort.
- Buy a small pack of a different type.
- Swap a few keys and compare.
How to swap switches safely
ZSA includes a double-sided key puller in the box. It removes both keycaps and switches, according to ZSA's guide.
ZSA also tells you to lay the board flat first. If you tent it, loosen the thumb cluster tenting screw and the leg.
Steps
- Lay the Moonlander flat and stable.
- Pull the keycap with the puller.
- Pull the switch straight up with the puller.
- Press the new switch straight down into the socket.
- Refit the keycap and test the key.
Rough handling can damage switches or the board, as this hot-swap guide from Fantech warns. Go slowly. Your keyboard is not a jar lid.
Common mistakes
- Buying the wrong stem type. The Moonlander uses Cherry MX-style stems (RTINGS). Low-profile switches will not fit.
- Ordering spares without counting. One owner lists 72 keys, eight on the thumb pads. Check ZSA's site before you buy.
- Expecting wireless. RTINGS and PC Gamer both describe the Moonlander as wired only.
- Ignoring software. PC Gamer found remapping easy in ZSA's Keymapp software. Switch feel is only half the customization story.
- Pulling at an angle. Pull straight up. Bent pins are a bad afternoon.
FAQ
Can you change switches on a Moonlander?
Yes. The board is hot-swappable, so no soldering is needed. ZSA supplies the key puller.
Which switch comes on the Moonlander?
You choose at checkout from Cherry MX and Kailh options. RTINGS and PC Gamer both reviewed units with Cherry MX Brown.
How many switches does a Moonlander have?
One owner's notes list 72 keys, eight on the thumb pads. Confirm on ZSA's product page before ordering spares.
Is the Moonlander good for gaming and office work?
RTINGS rates it excellent for gaming and fantastic for office use. PC Gamer says it handles gaming well, though ZSA made some unusual layout choices.
Does it work with Windows, macOS and Linux?
RTINGS lists it as fully compatible with all three.
More from the blog
Looking for more quick explainers? These guides come from our General Knowledge section:
- What Does HML Mean on Snapchat: A Complete Guide
- What Are Program Stars in MLB The Show 24?
- What is Passive RP in FiveM: A Detailed Exploration
The bottom line
Pick a sensible starting switch, such as Cherry MX Brown, and live with it for a while. If it annoys you, swap it. That freedom is the whole point of the Moonlander.
Sources
- RTINGS: ZSA Moonlander review
- RTINGS: Moonlander vs MoErgo Glove80 comparison
- PC Gamer: ZSA Moonlander review
- ZSA: Change your own keyswitches
- TechPowerUp: Moonlander Mark 1 announcement
- Deskthority wiki: Moonlander
- Owner's Moonlander notes (personal page, single-user experience)
- Fantech: How to replace switches on a hot-swappable keyboard